Bent Magnetic Modal Study
This study was used to determine the effects of slight bends in magnetic specimens. The primary modal frequency will then be used to find...
Additively Manufactured Copper Testing
Testing 3D printed copper at both room and elevated temperatures. These materials could be used as combustion chamber liners in rocket...
PMC Tensile Properties
PMC (Polymer Matrix Composite) Test using ARAMIS Digital Image Correlation to view the strains related to the loads.
Orion Fairing Jettison Spring Test
Lead test engineer for the new Orion Fairing Jettison Spring.
DCB Crack Growth Study
Studying the crack growth rate of a Double Cantilever Beam (DCB) structure as functions of load and stroke. Used ARAMIS Digital Image...
Jim Beam Modal Test Study
Performing a study that compares the results of a tap test and shaker test to obtaining modal parameters. Other small FEM and boundary...
Magnus Effect in Duct Flow
Senior Design and Rocket team project that looked at the possibility of magnifying the Magnus effect due to boundary layer interactions...
Dynamic Environment Testing
Produced PSD curves for NASA Langley Research Center's Aircraft fleet. Two aircrafts tested were the HU-25 Jet aircraft and the B-200...